3D PLA SILK Filament - Diameter 1.75mm - Coil 1kg - Color Pink

PLA SILK filament (1.75mm) is a filament manufactured in Europe for 3D printers with FFF/FDM technology.
The PLA SILK has been improved with added polymers that give the material a high level of dispersion and reflection of light, to achieve the silky surface finish that defines this filament. Based on PLA as the main material, it maintains the properties and advantages of standard PLA (easy modeling, absence of warping and low contraction) and even surpasses it in some aspects, as it has greater mechanical and thermal resistance than PLA.
Features:
-Diameter 1.75mm.
-1000 gram coil.
General printing parameters:
-Nozzle temperature (between 200ºC and 230ºC)
-Bed temperature (between 50ºC and 70ºC)
-Fan: ON (100) %
Physical properties:
-Density: 1.24 g/cm3
-Flow rate: 8 g/10 min (ISO 1133-A)
-Flow rate: 3 g/10 min (ISO 1133-A)
-Sterochemical purity: 96 (% L-isomer)
-Residual monomer: 0.3% (max)
-Humidity (Karl Fisher Coulometric): 400 (max) ppm
-Fusion temperature: 155º C Tm (DSC)
-Crystal transition temperature: 55-60º C Tg (DSC)
Mechanical properties:
-Tensile modulus: 3500 MPa (ISO 527-1)
-Tensile strength: 45 MPa (ISO 527-1)
- Performance tension: 5% (max) (ISO 527-1)
-Impact with Charpy muescas 23º C: ?5 kJ/m2 (ISO 179-1eA)
Does not include 3D printed sample figure.

Suitable for use on the following printers:
3D PLA SILK 1.75mm 1kg

Yield: 1.75 mm / 1 kg