3D PLA Filament - Diameter 1,75mm - Spool 1kg - Color Red

PLA Filament (1,75mm or 2,85mm) is a filament manufactured in Europe for 3D printers with FFF/FDM technology.
PLA is a biodegradable plastic that is obtained from natural resources from the starch extracted from corn, beets and wheat. It is manufactured with a raw material and a process that not only manages to match PLA850 in properties, but surpasses it in some aspects.
Features:
-Diameter of 1,75mm.
-1000 gram coil.
General printing parameters:
-Nozzle temperature (between 190ºC and 230ºC)
-Bed temperature (between 50ºC and 70ºC)
-Fan: ON (100) %
Physical properties:
-Density: 1,24 g/cm3
-Flow rate: 8 g/10 min (ISO 1133-A)
-Flow rate: 3 g/10 min (ISO 1133-A)
-Sterochemical purity: 96 (% L-isomer)
-Residual monomer: 0,3% (max)
-Humidity (Karl Fisher Coulometric): 400 (max) ppm
-Melting temperature: 155º C Tm (DSC)
-Crystal transition temperature: 55-60º C Tg (DSC)
Mechanical properties:
-Tensile modulus: 3500 MPa (ISO 527-1)
-Tensile strength: 45 MPa (ISO 527-1)
-Strain at performance: 5% (max) (ISO 527-1)
-Impact with Charpy notches 23º C: ?5 kJ/m2 (ISO 179-1eA)
Does not include 3D printing sample figure.

Suitable for use in the following printers:
3D PLA 1,75mm 1kg

Yield: 1,75 mm / 1 kg