Creality Sparkx i7 Combo Open 3D Printer + CFS Unit - Volume 26x26x25,5cm - 720px HD Camera - CFS Lite Multicolor System - Metal Body - Speed Up to 500 mm/s - USB, WiFi

Automatic multicolor printing, 100% autonomous calibration and a top speed of 500 mm/s make the SPARKX i7 the Creality's bet for those who want to create professional objects without wasting time on adjustments. Its 260x260x255 mm volume and integrated AI camera allow you to monitor large or miniature parts with the same precision, while the kit arrives ready to print in less than five minutes thanks to fully automatic leveling and Z adjustment.
Uncompromising volume and speed.
With a compact chassis (470x423x456 mm) and just 9,1 kg, the printer reaches 500 mm/s and up to 10,000 mm/s � acceleration without compromising surface quality thanks to Input Shaping and Pressure Advance functions. The interchangeable hotend works at 300 �C and the textured PEI bed reaches 100 �C, sufficient for PLA-CF or TPU.
CFS Lite multicolor system.
The CFS Lite module supports four 1,75mm spools, RFID identifies Creality material, and keeps filaments dry with active desiccant. The changeover is fully automatic: loading, purging and filling without intervention, reducing waste and allowing clean color transitions even in large pieces.
Automation and AI camera.
A 720-pixel HD camera monitors the job and stops printing if there is spaghetti, knots or lack of filament. The RGB bar reports progress and a “night mode” silences fans and turns off lighting. Features like Power Loss Recovery and tangle detection add security to the process.
Modular design and quick maintenance.
Hotend, extruder lever and filament cutter are replaced in seconds, minimizing downtime. The Direct Drive extruder improves retraction in flexible materials and the electronics operate at 24 V with a maximum consumption of 700 W.
Materials and connectivity.
Compatible with PLA, PETG, TPU and composites in 3MF/G-code using Creality Print 6,3, connects via USB or 2,4 GHz Wi-Fi and can be integrated into home networks for remote control.
Features:
-Smart CFS: Print up to 16* colors with filament change system (CFS×4). *With 4 CFS modules (In this product only 1 CFS module included)
-Automatic Calibrations: Filament, leveling and PA without manual effort.
-Easy to Start: 95% pre-assembled with practical guide.
-Multifunctional Extruder: Resistant to jams and easy maintenance.
-Metal Body: Cast aluminum, robust and elegant design.
-Fast Speed: Up to 500 mm/s with acceleration of 12,000 mm/s �.
-Note: To provide a better user experience, the product is continually optimized and updated. Some accessories or details may vary slightly from the description. Please refer to the actual product for the most accurate information.
Specifications:
Design:
-Type: FDM 3D Printer
-Structure: Reinforced metal chassis with closed panels
-Screen: Color touch screen
-Multicolor system: CFS (Creality Filament System) included
Printing:
-Print volume: 260 × 260 × 255 mm
-Maximum speed: Up to 500 mm/s
-Acceleration: Up to 10,000 mm/s �
-Layer height: 0,05 – 0,3 mm
-Precision: 100 �0,1 mm
-Leveling: Automatic
Extruder and Hotend:
-Extruder type: Direct Drive
-Maximum hotend temperature: Up to 300 �C
-Maximum bed temperature: Up to 100 �C
-Nozzle diameter: 0,4 mm (interchangeable)
-Filament diameter: 1,75 mm
Compatible materials:
-Filaments: PLA/PETG/PLA-CF/TPU
Connectivity:
-Interfaces: WiFi � USB
-Software: Compatible with Creality Print
Smart Features:
-Filament detection: Yes
-Resumption after power failure: Yes
-Integrated camera: Yes
Contents of the box:
-Includes: Creality SPARKX i7 � CFS System � Power Cable � Tool Kit � User Manual