P/N: PLA-TOUGH-Black |EAN: 8435490656376
TOUGH PLA Filament (1,75mm or 2,85mm) is a filament manufactured in Europe for 3D printers with FFF/FDM technology.
TOUGH PLA is an advanced material designed to obtain high impact resistance and strength similar to ABS, combining the rigidity and printability of PLA. Even for large pieces.
Features:
-Diameter of 1,75mm.
-1000 gram coil.
General printing parameters:
-Nozzle temperature (between 200ºC and 220ºC)
-Bed temperature (between 50ºC and 70ºC)
-Fan: ON (100) %
Physical properties:
-Density: 1,21 g/cm3
-Flow rate: 8 g/10 min (ISO 1133-A)
-Melting temperature: 150-160º C Tm (DSC)
-Crystal transition temperature: 60-65º C Tg (DSC)
Mechanical properties:
-Tensile modulus: 2780 MPa (ISO 527-1)
-Tensile strength: 47 MPa (ISO 527-1)
-Strain at performance: 3% (max) (ISO 527-1)
-Impact with Charpy notches 23º C: 30 kJ/m2 (ISO 179-1eA)
Does not include 3D printing sample figure.
Suitable for use in the following printers:
3D PLA TOUGH 1,75mm 1kg
Yield: 1,75 mm / 1 kg
Specific References
PT
ES
EN
FR