P/N: PLA-Glow in the dark |EAN: 8435490656574
GLOW IN THE DARK PLA Filament is a filament manufactured in Europe for 3D printers with FFF/FDM technology. It is biodegradable, obtained from natural resources from starch extracted from corn, beets and wheat.
This filament incorporates the ability to absorb light and then emit it, making it glow in the dark.
Features:
-Diameter of 1,75mm.
-1000 gram coil.
General printing parameters:
-Nozzle temperature (between 190ºC and 230ºC)
-Bed temperature (between 50ºC and 70ºC)
-Fan: ON (100) %
Physical properties:
-Density: 1,24 g/cm3
-Flow rate: 8 g/10 min (ISO 1133-A)
-Flow rate: 3 g/10 min (ISO 1133-A)
-Stereochemical purity: 96 (% L-isomer)
-Residual monomer: 0,3% (max)
-Humidity (Karl Fisher Coulometric): 400 (max) ppm
-Melting temperature: 155º C Tm (DSC)
-Crystal transition temperature: 55-60º C Tg (DSC)
Mechanical properties:
-Tensile modulus: 3500 MPa (ISO 527-1)
-Tensile strength: 45 MPa (ISO 527-1)
-Strain at performance: 5% (max) (ISO 527-1)
-Impact with Charpy notches 23º C: ?5 kJ/m2 (ISO 179-1eA)
Suitable for use in the following printers:
3D PLA 1,75mm 1kg
Yield: 1,75 mm / 1 kg